How exactly should I choose a sw...

I. Application areas.

1, sweeper.

The first to talk about is the sweeper, which is the most suitable for lazy people in the three appliances, after all, when cleaning sweeper thoroughly able to achieve 0 hands, when you go to work can help you remotely clean up the road at home. And under the bed, under the sofa and other short space can also be easily handled.

The disadvantage is that a lot of liquid or large particles of wet and dry mixed garbage can not be cleaned, and there will be part of the blind spot missed. (Personally, I think we can ignore)

2、Wash the car.

The next is the scrubber, the same is used to clean the ground, to achieve suction, dragging, washing as one, a variety of large particles of wet and dry garbage can be done. And basically have a brush self-cleaning role, do not worry about cleaning problems after each use.

The disadvantage is that you must operate by hand, and under the bed and other short space is difficult to enter, of course, if the area is very small road space is narrow friends are not recommended to get.

3, vacuum cleaner.

Finally is the wireless vacuum cleaner, clean up the widest scope, the basic  clean up the road, brush head to clean up the bookcase, closet, mite brush head to clean up the bed, you can say that the road and fa?ade can be done.

But the flaw is also obvious, not only must you do it yourself, and can not cope with wet garbage. But given its flexibility I think small and large households are suitable to get one.

Second, the purchase points.

After talking about their respective areas of application, I will then come to talk about their respective purchase points. In order to be more intuitive are selected stone corresponding products of the new, but does not mean that the new is just right, as usual, I will point out their advantages and disadvantages, you can also discuss together with the comments section.

1, sweeping machine.

The main points of the purchase of sweeping machines are the construction of map obstacle avoidance, cleaning ability, mopping ability, range and its human-computer interaction.

As a sweeper, the most important thing is to clean up the process 0 hands, so it is important to build a map planning ability, and thus the purchase of a laser navigation is the minimum requirement. Stone G10 not only has laser navigation, and algorithm upgraded to 8.0 thus building a very accurate map.

Cleaning ability, in general, suction power is basically enough, mainly to see whether the main brush and side brush with the clean-up omissions, can see the stone in the clean-up session regardless of the size of the particles of waste are not missed.

And in addition to do not miss, the stone also with the help of rubber brush design thus reducing the hair coiled, for the family pets and women's friends simply do not too powerful.

Mopping ability, the stone can be mopped by the mop vibration, so as to achieve for the吸塵機 From the motion picture you can see the cleaning effect is very good, the ground color pencil marks without residue.

The endurance level is not really about the battery size, as the sweeper has a rechargeable role. Therefore, it mainly depends on the size of the dust box and water tank, which also led to the development of two different directions of the sweeping robot. To minimize throwing garbage, you can choose a sweeper with the function of self-collecting dust. If you want to mop the floor, you can choose a robot with a self-cleaning mop.

For example, the stone G10 is the main self-cleaning mop, according to the automatic scraping and washing method, can clean the mop very neat. The whole process does not need to manually clean the mop and the base station, just change a net, sewage tank can be.

And compared to other robots that can self-cleaning mop, the stone can also carry out automatic replenishment of the water tank, is really a gospel for lazy people. (The first in the field)

And thanks to the design of the mop adjustment, not only can achieve automatic distinction between the road and blanket, and can also be naturally air-dried to prevent the noise after the drying of the base station.

Finally is the human-computer interaction, itself is the APP role, which minefield settings, house split, on-time schedule belongs to the necessary functions. Cleaning order, remote control and its double-layer map belong to the ascending role.

Can Plywood be laser cut?

Can Plywood be laser cut?

40W Laser. You can typically cut up to 5 mm acrylic, 6 mm soft woods using a 40w laser. A basic rule with cutting acrylic – the slower the cut, the nicer the edge, so if you reduce the speed enough you can achieve a smooth polished edge.

What can a 40W CO2 laser cut?

As you could have guessed, 'the effect that powerful lasers have on actual flesh varies both with the wavelength, or color, of the light and the duration of the pulses that they produce. ' But the real finding of these researchers is that lasers cut flesh by creating a series of overlapping micro-explosions.

Can lasers cut humans?

A CNC laser cutter is a piece of computer numerical control (CNC) equipment that uses a focused, high-powered laser beam to mark, cut, or engrave a material to form custom shapes. Its unique design and operation make it highly accurate, especially when cutting intricate shapes and small holes.

What is a CNC laser?

Oxygen is the standard active assist gas used for laser cutting of mild and carbon steels. It is also referred to as the cutting gas. When cutting with oxygen, the material is burned and vapourised after being heated up to ignition temperature by the laser beam.

Which gas is used in laser cutting?

Class 4 lasers are high power (CW. > 500mW or pulsed >10J/cm²) devices. Some examples of Class 4 laser use are surgery, research, drilling, cutting, welding, and micromachining. The direct beam, specular and diffuse reflections from Class 4 lasers are hazardous to the eyes and skin.

What are 3 types of lasers?

Magurele Laser in Romania officially becomes the most powerful laser in the world. The laser at Magurele, near Bucharest, Romania marked a world premiere after reaching the highest power, 10 PetaWats.

What are Class 4 lasers used for?

The type of lasers used for laboratory experiments is solid-state lasers. The laser produces light energy and causes amplification when promoted by electromagnetic radiation. It is used in barcode scanners, laser printers, DNA sequencing, laser surgery and skin treatment etc.

What's the most powerful laser?

What is eye safe? Manufacturers have referred to lasers with operating wavelengths longer than 1400 nm (mid to far infrared) as eyesafe. Wavelengths in this region are absorbed in anterior portions of the eye (mainly cornea) and therefore never reach the retina.

Which laser is used in lab?

Now, today lasers can go from less than 5mW all the way up to 5,000mW or 5W. So that means knowing where the burning threshold is and that threshold is at a minimum of 100mW as a general rule. That means that any laser below 100mW will be hard-pressed to burn anything and will flat out not be able to.

Which laser is eye safe?

Lasers tend to be more accurate and a quicker than their plasma cutting cousin, yet plasma cutting can cut through every single metal type whereas lasers cannot. Plasma cutting is a more dangerous process than laser cutting, yet it is also best at cutting thick materials.

Laser Equipment

What are the main effects of cos...

Effective price to improve the winning low volume injection molding rate of new projects. Because of the continued aggravation of industry competition, many construction companies have won bids at low prices, the profit margin has become smaller and smaller, the conclusion is low salary and low count take. Management methods of good companies can still be small, a slight release of pressure management methods will produce a loss of money. The occurrence of "super black hole" in project cost control is ultimately a regulatory problem, mainly in the absence of rules to follow, or there are rules not followed. Therefore, how to save energy and reduce consumption to fill the gap, save money to improve quality and efficiency is the eternal theme of project cost control style. In the direct cost of construction projects, raw materials usually account for 60% of the costs, so the management of raw material costs is the top priority of cost control. Material management must be the first to start from the acquisition of this stage, bulk commodity raw materials to the relevant departments of the enterprise unified supply is appropriate, but also to implement the bulk procurement bidding system, the same city network quality bidding, or according to the construction schedule and market prices, using spot transactions and futures trading both acquisition. The materials procured by the project itself must ensure that the goods are more than three, raw materials collection, transportation, collection, management, hair of each stage need to create a rigorous monitoring mechanism system. To further strengthen the manipulation of labor costs, create human capital overall upgrade, complete human capital to provide the best match with the new project requirements of human resources operating mechanism, and on time tracking check, so that human capital network resources to obtain the maximum use. To streamline the organization of new projects, make full use of the cost of engineering projects and reduce overhead costs.

Culture education transfer to enhance job cost accounting software the cost management concept of all personnel. To strengthen project cost control, build a good environment where the company attaches overall importance, all staffs of engineering projects participate, and the whole process of engineering construction production and manufacturing manipulates cost increase. New project operation, no matter which method is used, needs to create a rigorous risk-based pledge and project cost control reward and punishment system. It is important to ensure that contracted quantities are delivered under the condition that product costs are properly developed. If a new project loses money due to negligent supervision or a "super black hole" in project cost control, the project manager must be held accountable for his obligations depending on the details, and efforts should be made to solve the problem of profit but not loss.

Select the right person to create noise cancelling earbuds the project manager cost fee responsibility system. To grasp the right project manager, build a good project management, as the "leader" to strengthen the construction project management. In recent years, many companies to the project in the scope and recognition of the basic the same situation, the original small-scale projects but completed a good economic benefits, some should have been profitable new projects instead of a relatively serious loss, the important lies in the engineering project manager and the new project executives quality. Therefore, to enhance the management ability of project managers is the most important hurdle in creating a new project contracting system for engineering construction. New project bidding clear project cost control index values and obligations, and layers of grasp implementation to each position. According to the promotion of obligatory cost control, reasonable plugging of economic benefits such as outsourcing, material procurement, machinery and equipment purchase and management and non-productive expenditure outflow way, which is conducive to raw material procurement and supply quality and price comparison bidding system, purchase of machinery and equipment expenditure program approval system, period cost expenditure budget quota system, engineering project manager to asset recycling for life and other types of rules and regulations effectively implemented.